“Silver” Aluminium Hatch for Yachts and Motor Boats.
Hatches for yachts and motor boats made using only the best materials
- Extra-thick light anodised aluminium alloy,
- Methacrylate plexiglass,
- Neoprene sealing gaskets,
- Fibreglass reinforced nylon handles,
- Austenitic stainless steel springs, screws and pins.
The design of the frame guarantees:
- maximum bending resistance,
- maximum watertightness,
- minimum protrusion on deck.
Adjusting the opening height is especially simple: by moving the cover, the hatch can be held open in any position from 0 to 180 degrees.
No stays are needed (stoppers, telescopic shafts, etc.), no knobs, no pre-set positions.
A large stainless steel stabilising spring supports the weight of the cover, preventing its accidentally closing.
N.B.: items 218.200 and 218.205 (340 x 195 mm) are not equipped with this spring, given the reduced size and weight of the cover.
All hatches can be held open in a convenient “half-open position” which ensures efficient cabin ventilation but prevents the cover from being opened from the outside.
- PROFILE MAX 40 MM ABOVE THE DECK
- MADE IN A LIGHT ALUMINIUM ALLOY, SILVER ANODISED WITH EXTRA THICKNESS OR PAINTED ON REQUEST
- PLEXIGLASS STANDARD COLOUR IS SMOKE GREY
- CAN BE HELD HALF OPEN FOR BETTER VENTILATION
- CAN BE HELD OPEN IN ANY POSITION
- FLYSCREEN, DARKENING PANEL AND FINISHING FRAME AVAILABLE ON REQUEST
- OUTSIDE FOLD-DOWN HANDLES AVAILABEL ON REQUEST
- CUSTOM SIZE HATCHES CAN BE SUPPLIED FOR MINIMUM ORDER QUANTITIES
Optionals.


Outside Handle
Extra-flat delrin handle. The hatch can be opened and closed from the outside and held half-open for ventilation. A safety lock prevents undesired access.

Optical alarm
This system indicates whether the hatch is open or closed from any location on the boat.

Inside/Outside lock and key
The lock can be operated with a key from both inside and outside.

Finishing frame, flyscreen and darkening panel
Removable finishing frame, flyscreen and darkening panel, all in ivory ABS.